Product Catalog - Packaging Equipment

Operators are taught equipment operation by hands-on training. These programs are designed to give our customer the fundamental skills and knowledge needed to operate the equipment efficiently and safely.

• 

  WRT-CRW

  * NEMA 4/12 control panel dust tight and waterproof * 100% Structural Steel Construction * Easily available non-proprietary parts * Superior driving mechanism with heavy duty ring gear * Angled carriage to wrap approximately 2" above floor level * 25” ring gear bearing drive/support * AC variable frequency drives and motors for safe, reliable performance and minimal maintenance * 20” NO-THREAD® powered pre-stretch carriage with 50-300% pre-stretch * Rotary arm speed up to 12 RPM * 4,000 lbs load weight capacity * Up to 30 loads per hour Production Rate: * Up to 30 loa...

  
  
• 

  Squid - DOD Large Character - Vector XII

  The Vector XII large character industrial ink jet printer offers the modularity and versatility that manufactures and contract packagers need. With the ability to print up to 12 lines from 6 print heads, the Vector XII large character ink jet printer has the tools you need to get the job done. 1" and 1 3/4" print head sizes are available offering six print sizes ranging from 1/2" to 1 3/4". The Vector XII system can also be programmed and maintained with a PZ through a standard RS-232 port. Benefits: * Print up to 12 lines from one controller on a variety of products * ...

  
  
• 

  Squid - VDP In-Line Printing System

  Squid Ink's VDP In-Line™ printing system is ideal for printing variable information in-line on your existing narrow web flexo press. VDP In-Line makes it easy to cost-effectively print variable data on tickets, tags and labels. The VDP In-Line conveniently mounts on your new or existing web press or other material handling system to print variable information inline without having to take the job offline for a second pass. Benefits: * Quality print * Modular design * Quick installation and startup * Low maintenance operation * Reduced consumable costs * Lower cost of ownership * Short...

  
  
• 

  Continuous Feed Dual Unwind Labelers

  The CTM Continuous Feed Dual Unwind (CFUD) is a stand alone unit designed to eliminate down-time associated with supply roll changeover, therefore increases production speeds. Continuous feed dual unwinds improve efficiency and lost time of any roll-fed labeler by providing nonstop, uninterrupted label supply at high speeds. The continuous feed dual unwind functions as a standard loose loop controlled powered unit. When the supply roll in use unwinds to a predetermined level, a sensor activates a warning light and signals the drive to feed the remaining labels into a holding bin. The secon...

  
  
• 

  H-Base Stands

  H-Base Stands * Heavy duty one-piece base construction of welded carbon steel tubing. * Vertical upright construction of .250" wall DOM Steel tubing. * Patented internal assembly designed for ease of vertical height adjustment. * Traverse construction of Thomson bearings and rails. * Traverse assemblies are equipped with a “half nut” feature allowing both “quick positioning” and “fine adjustment.” * All carbon steel components are coated with a rust inhibitive primer and finished with "Steel It" polyurethane paint. * All aluminum parts are ...

  
  
• 

  T-Base Stands

  # Heavy duty one-piece base construction of welded carbon steel tubing. # Vertical upright construction of .250" wall DOM Steel tubing. # Patented internal assembly designed for ease of vertical height adjustment. # All carbon steel components are coated with a rust inhibitive primer and finished with "Steel It" polyurethane paint. # All aluminum parts are anodized. # Stands are supported on 4" diameter locking casters (leveling pads are optional.) # Each T-base stand is labeled with a warning label that lists weight limitations and safety precautions for operator protec...

  
  
• 

  Decorative Bottle Labeler

  The system shown was designed to label a top shelf Bourbon Bottle. The end user was in pursuit of a specific look that required the application of five labels to each product. The bottle was gated into the labeling area where a leading edge label was applied. Front and back labels were applied in the second labeling station where the bottles were secured by the top hold down belt. A top tamper evident label was applied over the decorative cork top and wiped down the sides of the bottle neck. A complete wrap label was then wrapped around the bottle neck to secure and cover the trailing edges...

  
  
• 

  Labeling & Batch Counting

  The system shown was designed to label a small shipping container. Each container was labeled with a shipping label that contained variable shipping information. The variable data printed on each label was handled via a loose loop arrangement. Additional product handling was required for labeled products as the packages were shipped both singularly and in bulk. Boxes could be fed through the system one at a time or through a stacker counter that was programmable to various stack heights. A lane divider / router directed boxes or stacks of products to one of two possible loading platforms. R...

  
  
• 

  Pail Labeling System

  The CTM Pail Labeler is a heavy duty labeling system designed for use in industrial production environments where dependable, accurate and trouble free labeling of pails is required. Pail labelers are available with either 360 Series labelers or 3600 Printer Applicators. Fanfold label supply and roll fed label supply configurations are both available. System Operation: A Model 360 (apply only) or Model 3600 PA Series printer applicator is positioned "reels up" alongside the product conveyor and includes an air cylinder operated, tilt-out style, o-ring carrier grid to "wipe on...

  
  
• 

  Wine Bottle Labeler

  This system was specifically designed for the wine bottling industry. Two modes of operation are required in most wine labeling applications. Modes of Operation: Single Label Applications Single labels (front or back) can be applied to various diameter or height wine bottles. Labels can be oriented specifically to physical characteristics, registration marks or existing graphics. One applicator required Front & Back Label Applications Front & back labeling will require front and back labels to be converted in alternating fashion on the same web. As the indexer rotates each wine bott...